Plexiglas® Vision Acrylic Sheet
The newest innovation for overhead and rear projection screens. Keep images visible from every angle, up-close, far away, one-side or both.
Plexiglas® Vision acrylic sheet is the newest innovation for overhead and rear projection screens. Its super brilliant sheet design and high contrast ratio make images visible from every angle, up-close, far away, one-side or both.
Choose from four versions of the sheet: white for holographic effects, grays for one- or two-sided viewing, or colorless heavy matte for scratch and impact-resistance. Project your visual ideas beautifully with Plexiglas® Vision acrylic sheet.
- For in-store displays, museums, showrooms, theaters.
- Best viewed on fine-matte side to avoid reflection.
- Material can be cut out in any shape or thermoformed.
- Viewing angle is 10 to 170 degrees.
- Projection can be made from either side of sheet.
- High contrast ratio, suitable for 4:3 and 16:9 formats.
- Half the weight of glass.
- Available in an impact version.
Plexiglas® Vision acrylic sheet permits very lightweight screens to be fabricated in uniquely creative shapes. With a gain of 3 (image brightness x 3) and a very high contrast ratio, Plexiglas® Vision acrylic sheet produces striking colors, sharp images, large formats and wide angles. Beyond unconventional video and graphic effects for commercial and retail environments, Plexiglas® Vision acrylic sheet also enables unique indoor architecture and spectacular murals. Choose from four versions for your application needs.
0.118" (3mm), 0.197" (5mm)
80" x 120", 80" x 120"
|WHITE||27032||For holographic effects|
|GRAY||28001 P97||Fine-matte finish for one-sided viewing|
|GRAY||28001 DP97||With two fine-matte finishes, best for viewing from both sides|
|VS COLORLESS||2037||Heavy matte finish on both surfaces to resist impact, scratches and fingerprints|
AVERAGE PHYSICAL PROPERTIES OF PLEXIGLAS® VISIONACRYLIC SHEET
|PROPERTY||UNITS||28001 GRAY DP-97 MATTE||28001 GRAY P-97 MATTE||27032 WHITE GLOSS||VS COLORLESS HEAVY MATTE||TEST METHOD|
|Tensile modulus||psi||480,000||480,000||480,000||330,000||ASTM D638|
|Yield stress||psi||11,000||11,000||11,000||7,600||ASTM D638|
|Impact strength (Charpy,0.236")||ft-lb/ 1/2" by 1" section||7||7||7||ASTM D256|
|Half gain angle (vertical/horizontal)||Degrees||12||10.6||1.1||14.2|
|Gloss at (Side A/Side B)|
|20 Degrees||-||<1 / <1||<1 / 76||92 / 92||<2 / <2|
|60 Degrees||-||<2 / <2||<2 / 84||97 / 97||<14 / <14|
|85 Degrees||-||<4 / <4||<6 / 96||99 / 99||<9 / <9|